Custom Product - COVID-19 circumstances and huge demand has caused us longer than expected delays. Please allow 4-7 weeks to manufacture this product.
- 1000-1400hp+ Rated efficiency.
- For highly modified street and race style engine Evo Mitsubishi’s.
- Lightweight tube & fin core design.
- Fast recovery time.
- 530x300x100mm race spec core - 2 Options
- Fabricated bottom inlet/outlet end tanks, with either a 3.0" or 3.5″ push-on hose style connection. Other options available in checkout.
- Available in Raw, Black or Polished finish.
- Please be aware that due to the larger 100mm core thickness, the end tanks are approximately 115mm in wide, some slight trimming might be required to fit depending on your model, but some sacrifices have to be made to flow genuine hp.
- Please also be aware that custom piping will have to be made to suit this Intercooler, or at least some small modification to piping either side of the cooler outlets as a minimum.
- This intercooler can be ordered with hose Style bottom inlet/outlet end tanks.
- This intercooler can be ordered with Plazmaclamp assemblies.
- We can build a completely custom end tank style – please Contact Us to discuss further options.
Please be advised that the flow rating figures for this intercooler is based on CFM flow figures and experience. These figures might not be correct if a larger capacity engine (6 Litre +) and/or larger body 90mm + front blade size turbocharger is used. Please contact us if you fall into this category for intercooler requirement.
|Dimensions||80 × 40 × 15 cm|